Five Steps teach you well to choose the right machine:

Step 1: choose your needed machines kit and controller according to STZQ machines comparision table.

Step 2: Check whether more orbital tracks are required according to STG tracks slection table

a)If STZQ-I machine is selected then continue to step 2

b)If STZQ-II machine is selected then no need to continue as all standard items included in this kit.

Step 3:Check whether more claw connectors are required

We suggest each orbital track has its own claw connector for ease of installation.

Step 4: Confirm whether more chain is needed accoding this formula L=(OD+0.024)*3.14+0.5

Note:

a)OD,means outside diameter(unit:m)

b)The final chain length can be longer than the calculated length without detriment to the operation

c)E.g. For pipe size 1.016m,4m or 4.5m chain both are available.In fact 4.5m chain can also be available for pipe size 1.219m.

Step 5: Final check with your products engineer from Sunbow Technology

 

 

STG Tracks Selection table :

NO.	OD range of Pipe/mm	Orbit or orbit combination
1	320-400	STG3
2	400-495	STG4
3	495-550	STG5
4	550-680	STG1+ STG 3
5	630-770	STG1+ STG 4
6	730-830	STG1+ STG 5
7	810-915	STG2+ STG 5
8	915-1020	STG1+ STG 6
9	1000-1100	STG2+ STG 6
10	1040-1160	STG3+ STG 6
11	1120-1250	STG4+ STG 6
12	1219-1310	STG5+ STG 6
13	1270-1480	STG3+ STG 4+ STG 5
14	1410-1500	STG6+ STG 6
15	1450-1595	STG1+ STG 5+ STG 6
16	1520-1675	STG2+ STG 5+ STG6
17	1610-1830	STG4+ STG 5+ STG 6
18	1800-2020	STG4+ STG 6+ STG 6
19	2020-2290	STG2 + STG3 + STG 6+ STG 6
20	2230-2500	STG3 + STG5+ STG 6+ STG 6
21	2420-2660	STG5 + STG5+ STG 6+ STG 6
22	2610-2850	STG5 + STG6+ STG 6+ STG 6
23	2800-3040	STG6 + STG6+ STG 6+ STG 6
Tracks replacement	STG 6	STG1 + STG5
		STG2 + STG4
		STG3 + STG3
	STG 5	STG1 + STG2
Remark:
a)Single orbit or combinations are simple and convenient to use.
b)Customers can select orbit combinations not limited to the table above